DIRECTIONS FOR USE WITH A PRESSURE WASHER

1. Use water without detergent in an initial cleaning to remove loose soil. Consult the pressure washer manufacturer's recommendations for maximum water temperature.
2. Place detergent suction tube directly into container of HOUSE WASH CONCENTRATE. Adjust metering valve (if applicable) to desired setting. Spray soiled areas, working from the bottom up and allow HOUSE WASH solution to penetrate for 1-3 minutes. If the foam level is not acceptable, adjust metering valve and respray soiled areas. If HOUSE WASH is too thick to flow through the intake line, dilute at the ratio of one part water to one part detergent in a separate container and place the detergent suction tube in the diluted solution. Readjust metering valve if necessary and repeat the application.
3. Rinse with water until foam is completely removed. Do not allow solution to dry on surface.
4. If soil remains, use a strong solution (2 fl. oz. of HOUSE WASH CONCENTRATE to one gallon of water) and scrub stubborn soil with a brush. Repeat step 3.